The great vinyl revival is making phonographs trendy again. Generation x and y know this as a record player. This flash back to the past thing is encouraging people to still own turntables and listen to current music with what is supposedly an artifact if compared to what technology has to offer today. Strange on this age of high technology people are regressing to older machines.
Also known as phonographs, record players are more complicated to play music on and are not portable. The personality it gives any room makes it a good bargain despite the cons and maintenance required. Parts like record player needles need replacement and maintenance. This guarantees great music quality from the player and the vinyl.
The first important step is to find the right replacement. It is vital that the new purchased needle is compatible with the machine. Check any instruction documents that are included with the turntable upon its purchase. This may contain information of what specific parts are used. Best to message a phonograph specialty shop, in case the specifications are not provided. Inquire a specialist when you have an antique.
Nose pliers and compressed air may be needed as extra helping tools in replacing the stylus. Best to have means of pulling out the needle if there is any difficulty removing it from the cartridge. Use the compressed air in cleaning the area before inserting the replacement tip.
Make sure to turn off the machine before disassembling it. This includes the speakers and the built in preamp, if there is any. Remove the tone arm with the lock or lever function. Some cartridge carriers can be removed from the arm so it is easier to locate the part that needs replacement.
Access the stylus by lifting the arm up. Once the part is exposed, carefully remove the stylus by hand. Grip its side firmly but gently enough not to damage the fragile thing. Wriggle it until it loosens and gets removed. Use the pliers if the it gets stuck in the cartridge.
Put away the old stylus from the new one to avoid confusion from each other. Then, clean the area where the needle is lodged using the can of air that was prepare. This makes sure that the crevice is clean and does not have any excess particles that might damage the stylus.
Some separately purchased needles come with their own instructions, so it is best to follow that. The fresh stylus should fit into the same spot as the previous one in the cartridge, perfectly. While making sure the pointy end of the tip is facing down, make sure the replacement stylus is placed in without using too much force.
To make sure that the replacement is a success, test the record player. Put in a record and listen for any skipping, snapping and popping. If after the replacement your turntable still makes the same irregularities in sound, then the issue could be another part of the machine. In the event where the problem still persists, bring the device to a professional for repair.
Also known as phonographs, record players are more complicated to play music on and are not portable. The personality it gives any room makes it a good bargain despite the cons and maintenance required. Parts like record player needles need replacement and maintenance. This guarantees great music quality from the player and the vinyl.
The first important step is to find the right replacement. It is vital that the new purchased needle is compatible with the machine. Check any instruction documents that are included with the turntable upon its purchase. This may contain information of what specific parts are used. Best to message a phonograph specialty shop, in case the specifications are not provided. Inquire a specialist when you have an antique.
Nose pliers and compressed air may be needed as extra helping tools in replacing the stylus. Best to have means of pulling out the needle if there is any difficulty removing it from the cartridge. Use the compressed air in cleaning the area before inserting the replacement tip.
Make sure to turn off the machine before disassembling it. This includes the speakers and the built in preamp, if there is any. Remove the tone arm with the lock or lever function. Some cartridge carriers can be removed from the arm so it is easier to locate the part that needs replacement.
Access the stylus by lifting the arm up. Once the part is exposed, carefully remove the stylus by hand. Grip its side firmly but gently enough not to damage the fragile thing. Wriggle it until it loosens and gets removed. Use the pliers if the it gets stuck in the cartridge.
Put away the old stylus from the new one to avoid confusion from each other. Then, clean the area where the needle is lodged using the can of air that was prepare. This makes sure that the crevice is clean and does not have any excess particles that might damage the stylus.
Some separately purchased needles come with their own instructions, so it is best to follow that. The fresh stylus should fit into the same spot as the previous one in the cartridge, perfectly. While making sure the pointy end of the tip is facing down, make sure the replacement stylus is placed in without using too much force.
To make sure that the replacement is a success, test the record player. Put in a record and listen for any skipping, snapping and popping. If after the replacement your turntable still makes the same irregularities in sound, then the issue could be another part of the machine. In the event where the problem still persists, bring the device to a professional for repair.
About the Author:
Get a list of important things to keep in mind when purchasing record player needles and view our selection of needles at http://www.needlefinder.net today.
Sign up here with your email
Conversion Conversion Emoticon Emoticon