How Solar Energy Is Being Used As A Component For Pool Heater

By Brian Jones


The type of a thermodynamic process that is using the energy source to heat a water is called as the water heating. Waters typically are used for space heating, bathing, cleaning, and cooking. Some utensils are usually utilized for these purposes and these utensils include cauldrons, water heaters, pots, kettles, and coppers which are also called as the metal vessels.

Heating the swimming pools can also be one of the most popular use of this process. To heat and to maintain the swimming pools may be costly but by the use of solar energy, the expense may be reduced. There are a lot of options for the installation of pool heater Cudjoe Key FL and these may vary from the climate, the pool size, and how it is to be heated.

So the purpose of writing this article is providing you these simple steps in solar heating by saving money by not hiring a professional from Cudjoe Key, FL. These following steps are involved with three important methods. First, fill in the pool with water. Fill with the use of a dark colored and a thin sized hose. It is recommended that the water must flow longer in a hose because it is warmed more, thus, use a longer hose.

Be sure that when using the hose, it is being directed towards the sunlight to be able to let the energy be absorbed properly. Pointing the hose directly to the sunlight can be done and also, it can be mounted on a board that is being angled to sunlight exposure. A thin type of hose cover

The second method is heating. Use the solar blanket, a cover that is being designed for soaking up the energy then transferring it directly to the water. This blanket can help in an increased temperature of water for about 5 degrees Fahrenheit if a pool is covered within 12 hours. This also insulates the pools surface, thus, preventing the escape of heat.

A solar ring is another device that is utilizes in the process. The ring is an inflatable and a clear disk which floats on the surface of a pool to heat waters. A ring is generally 59 inches in diameter so having one is not enough to cover an 80 percent surface, so it is better to purchase a lot of rings. An advantage of these rings is lesser costs because an electricity is not necessary for it to function.

The solar panels are mounted on top of the roof. One suggestion is using the unglazed panel since it has a lower cost compared to other types, but it is less effective. Do the installation of heating system. This system includes a valve for the control of flow, pump, filter, and solar collector. The waters are pumped into the filter, towards the collector for heating, then returned to the pool.

The third and the last method is the prevention of energy loss. The pool must be well maintained and this can be done by maintaining the good condition of circulation and pump systems. Do a regular checking of filter in order to make sure that it is cleaning effectively the debris. The drain system should be clear from debris and the pump should circulate the waters properly.

Temperatures of the waters is to be checked also. The range of its temperature should only be 82 to 84 degrees or 78 to 80 degrees. A pools thermometer is recommended to be bought for their monitoring. Pools must always be covered with a blanket when not being used.




About the Author: